eee PC 901 motherboard

Discussion in 'Motherboard General Discussion' started by Hermelindo Sevilla, Mar 18, 2018.

  1. Hermelindo Sevilla

    Hermelindo Sevilla

    Joined:
    Mar 18, 2018
    Messages:
    1
    Likes Received:
    0
    Hello everybody in this forum,

    I know this is a very old motherboard made by Asus P/N: Q8G200PA120 for the subject's PC. It always has been a trouble the primary ssd which is soldered on the motherboard. Toying around with the parts that I have switched I have two principal questions.
    - Why when I replace the 16gb SSD that is accessible from the maintenance hatch, if I use a 32gb or bigger ssd or CF adapter to install a 128gb CF or use a mSATA adapter to install a 128gb mSATA ssd, the Physon 4gb ssd dissappears or becomes the slave? the second question is:
    - Is it possible to desolder the 4-1gb Samsung chips and solder in the 4-4gb chips (also Samsung) from the 16gb ssd board? Would I need to exchange the Physon controller as well?

    Please advise, your help is greatly appreciated,
     
    Hermelindo Sevilla, Mar 18, 2018
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. G7VAXP Motherboard (PC turns of by itself)

  2. Using a Dell Dimension 3100 BTX case with a Gigabyte (IBM) motherboard

  3. Need Help!! Motherboard does not have anyplace where I can connect my older 80 IDE Hd

  4. Gift/Toy???Asus 7" eee PC $399.95

  5. How good is the Asus EEE PC?

  6. ASUS Eee PC 1000H – The Best Laptop Award & the Best Green Gadget Award!!!

  7. eee box eb1012p

  8. The ASUS M2N-E SLI motherboard does not even start on the motherboard LAN port, and the speaker port

Loading...