How to clear bios post “c1”

Discussion in 'Motherboard General Discussion' started by mujuni, Aug 26, 2010.

  1. mujuni

    mujuni

    Joined:
    Aug 25, 2010
    Messages:
    1
    Likes Received:
    0
    Hi!
    I have sun ultra 20 workstation with 1.80 gigahertz AMD Opteron CPU. When I start my computer the workstation powers on but there is no video display on the monitor screen and the computer does not boot.
    During POST, the BIOS outputs the error code C1 which is equipped with a two segment LED display.
    What does this mean? What should I do to clear the problem? Please help
     
    mujuni, Aug 26, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to update bios compaq deskpro ???

  2. post bios flash problem

  3. 4 long beeps and blank screen after clear cmos action on a k7vza mobo

  4. ACER TravelMate 6410 was DEAD due to the bad bios flash and FIXED. ! here is how

  5. please help Ferrari 1100 bios failure, how to repair it?

  6. Bios settings for Abit KT7A-Raid - can't boot into XP after Bios update

  7. Asus A8V-VM CSM Bios Post

  8. TUF B450m-Plus fails to boot post BIOS update

Loading...